ds30092 rev. 5 - 3 1 of 2 www.diodes.com sbg1030ct - sbg1045ct ? diodes incorporated not recommended for new design sbg1030ct - sbg1045ct 16a surface mount schottky barrier rectifier features ? guard ring die constructi on for transient protection ? low power loss, high efficiency ? high surge capability ? high current capability and low forward voltage drop ? surge overload rating to 125a peak ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ? lead free finish/rohs compliant (note 3) mechanical data ? case: d 2 pak ? case material: molded plastic. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020c ? terminals: finish - tin. solderable per mil-std-202, method 208 ? ordering information, note 5, on page 2 ? polarity: see diagram ? marking: type number ? weight: 1.7 grams (approximate) b c d e g h j k l m a 123 4 pin 1 pin 3 pin 2 & 4 d 2 pak dim min max a 9.65 10.69 b 14.60 15.88 c 0.51 1.14 d 2.29 2.79 e 4.37 4.83 g 1.14 1.40 h 1.14 1.40 j 8.25 9.25 k 0.30 0.64 l 2.03 2.92 m 2.29 2.79 all dimensions in mm maximum ratings and electrical characteristics @t a = 25c unless otherwise specified single phase, half wave, 60hz, re sistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol sbg 1030ct sbg 1035ct sbg 1040ct sbg 1045ct unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage (note 4) v rrm v rwm v r 30 35 40 45 v rms reverse voltage v r ( rms ) 21 25 28 32 v average rectified output current @ t c = 95 c i o 10 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 125 a forward voltage, per element @ i f = 5.0a v fm 0.55 v peak reverse current @ t j = 25 c at rated dc blocking voltage (note 4) @ t j = 125 c i rm 1.0 50 ma typical total capacitance (note 2) c t 275 pf typical thermal resistance junction to case (note 1) r jc 3.0 c/w operating and storage temperature range t j , t stg -65 to +125 c notes: 1. thermal resistance junction to case mounted on heatsink. 2. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 3. rohs revision 13.2.2003. glass and high te mperature solder exem ptions applied, see eu directive annex notes 5 and 7. 4. short duration pulse test used to minimize self-heating effect.
ds30092 rev. 5 - 3 2 of 2 www.diodes.com sbg1030ct - sbg1045ct ? diodes incorporated not recommended for new design 0 2 4 6 8 10 05 01 0 01 5 0 i, ave r a g e f wd c u r r en t (a) (av) t , case temperature ( c) fig. 1 forward current derating curve c 1 2 total package per element i , instantaneous forward current (a) f v , instantaneous forward voltage (v) fig. 2 typical forward characteristics, per element f 0.1 1.0 10 100 0 0.4 0.8 1.2 t = 125 c j t = 25 c j 0 25 50 75 100 125 150 110100 i, p eak f o r wa r d s u r g e c u r r e n t (a) fsm number of cycles at 60hz fig. 3 max non-repetitive surge current 100 1000 0.1 1.0 10 100 c , t o t al c a p a c i t a n c e (p f ) t v , dc reverse voltage (v) fig. 4 typical total capacitance, per element r t = 25 c f = 1.0mhz j 500 200 ordering information (note 5) device packaging shipping sbg1030ct-t-f d 2 pak 800/tape & reel, 13-inch sbg1035ct-t-f d 2 pak 800/tape & reel, 13-inch sbg1040ct-t-f d 2 pak 800/tape & reel, 13-inch SBG1045CT-T-F d 2 pak 800/tape & reel, 13-inch notes: 5. for packaging details, visit our websit e at http://www.diode s.com/datasheets/ap02007.pdf.
ds30092 rev. 5 - 3 3 of 2 www.diodes.com sbg1030ct - sbg1045ct ? diodes incorporated not recommended for new design important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2010, diodes incorporated www.diodes.com
|
